Forging Peg ELLISSE STAKE Cation Electrophoretic Coating (Black) 18cm/28cm/38cm/48cm

Heat the stainless steel stick material up to 1,100 Degrees C, then press it with 1 ton of power to make its cross-section an oval shape. The oval shape prevents the peg to turn easily in the ground and makes it rigidly fixed. When it is turned 90 degrees in the ground, there will be a gap between it and the ground and it can be pulled out easily.

* The product shown in the photo is the 28cm version.
* Product specifications and design are subject to change without notice.
* The color of the product may look different depending on the PC environment you are using.


Size / Weight:
├ Length / 184mm
├ Weight / about 77g (per one)
├ Head / 10×12mm (elliptical shape)
└ Hammering Part / thickness 6×7mm
├ Length / 280mm
├ Weight / about 190g (per one)
├ Head / 13×17mm (elliptical shape)
└ Hammering Part / thickness 9×7mm
├ Length / 380mm
├ Weight / about 346g (per one)
├ Head / 13×16mm (elliptical shape)
└ Hammering Part / thickness 9.5×11mm
├ Length /480mm
├Weight / about 420g (per one)
├ Head / 13×16mm (elliptical shape)
└ Hammering Part / thickness 9.5×11mm
Material: S55C Steal
Painting: Cationic electrodeposition coating
Manufacturing: Sanjo City, Niigata Prefecture


18cm x 8 : 4937769076037
28cm x 8 : 4937769075542
38cm x 4 : 4937769075566
48cm x 2 : 4937769076372
※Only typical sets are listed.

Visit to Product Page

Return Top