Complete knife sharpening stone set

Achieve Masterful Sharpness Forever with Just This One!

I don’t know how to maintain my knives.
I don’t know what kind of whetstones and tools to buy.
We highly recommend this 4-piece set for those who are not sure what kind of whetstones and tools to buy.

Set Contents

  1. Knife sharpening guide clip
    This clip helps to maintain the “angle at which the knife is laid down for sharpening”, which is important when sharpening knives. Only for double-edged kitchen knives
  1. Double-sided sharpening stone
    A set of medium and finishing stones with different numbers.
    Medium grit sharpening stone #1000 (gray side): Sharp cutting edges with basic grain size.
    Finishing sharpening stone #3000 (yellow side): Sharp and sharp cutting edge.
  1. Sharpening stone stand
    A double-sided whetstone can be placed on it for sharpening. The back side has rubber feet to prevent slipping.
  1. Flattening whetstone for sharpening stone
    The center of a grinding wheel that has been used several times and has become concave is corrected to a flat surface.

■Manufacturing: NANIWA ABRASIVE MFG. CO.,LTD.
This company is a Japanese manufacturer of sharpening stones for industrial and home use, diamond tools for processing stone and other materials, sandblasting systems for stone engraving, and a full range of products related to abrasion, with over 60 years of experience, dedication, and innovation.

■How to Sharpen a Knife
1.Soak the sharpening stone in water for about 10 minutes.

2.Slide the clip from the tip of the knife to the sharpening position. *For double-edged knives only

3.Sharpen the knife by moving it back and forth against the sharpening stone with light pressure.
(When sharpening, do not wash off the surface sediment that appears)

4.Sharpen from Tip→Center→Corner of the blade. If the surface of the sharpening stone starts to dry,sprinkle a small amount of water.

5.After sharpening both sides, remove the burr from the edge by gently rubbing it on the surface of the sharpening stone.

After using the medium grit sharpening stone (Gray),sharpening with a finishing sharpening stone (Yellow) will result in a sharper edge!

■How to Use a Flattening whetstone
As the whetstone is used, it is gradually sharpened from the center part and becomes concave in a curved shape. Since a concave or scratched whetstone cannot be sharpened to a sharp edge, a surface correcting whetstone is used to flatten it.

1.Soak the flattening whetstone and the sharpening stone in water before use. Mark the entire surface of the sharpening stone with a pencil.

2.To re-flatten a sharpening stone, rub the flattening whetstone against the sharpening stone. Keep rubbing until the marks you drew disappear, indicating that the whetstone is flat.

If possible, it is recommended to correct the double-sided grinding wheel with a surface correcting wheel each time after finishing using it!
(Because it takes time to correct a heavily dented grinding stone.)

■Usage and storage
● Rinse the whetstone with water, dry it in the shade, and then store it.
● Avoid storing the whetstone outdoors in direct sunlight, cleaning it with hot water or detergent, and rapid drying with high-temperature airflow, as these significantly affect the quality of the whetstone.
● Wash the knife with dishwashing detergent, wipe off any moisture, and store it.

Specifications

Grit : Double-sided sharpening stone: #1000 (medium) / #3000 (finishing)
    Flattening whetstone: #60
Size : Double-sided sharpening stone: 175×55×25mm
    Flattening whetstone: 170×55×30mm
Material : Sharpening stone: Fused alumina  Stand: ABS resin/EVA
       Clip: ABS resin/Ceramic  Flattening whetstone: Silicon carbide
Manufacture : Double-sided sharpening stone: Vietnam
         Clip: China  Stand and Flattening whetstone: Japan

■Caution
● The whetstone is a tool sensitive to impact. Please avoid dropping, hitting, or applying excessive weight to it.
● Please be mindful of the blade edge when sharpening knives.
● Please avoid using or storing in unstable locations.
● If the product is deformed, damaged, or otherwise compromised, please discontinue use.

JAN

4937769501102

Return Top